Announcements

Over the last couple years the priorities in my life have changed. Had Matrix Garage grown big enough to hire enough employees and leave them to running it while I pursued other things I would have happily taken that route but it has generally stayed just big enough to keep me working overtime. 
I have decided to start focusing my carreer and passions elsewhere and that means that supporting the AW, AE, 4A and related communities has had to be moved much lower on the priority list. I have decided to keep the store up to provide parts that only we offer, or other things that are hard to come by elsewhere. You will notice many big name, readily available products have been taken down and we will continue to do so. It's just not worth our time trying to compete with the big corporations selling at cutthroat prices and it just takes up more of my time. 
I will try to keep providing those parts that we make or that we have developed and sell as a service to the community but understand that now this is something I do in my spare time because I don't want to leave people hanging. 
I try to make shipments and process orders at least twice a week. If you want Amazon next day shipping buy from Amazon. I will do my best to keep order time and customer service at a reasonable level but have some understanding. I am not making money on this and it takes away from my other work and other issues that are very important to me right now. 
I have always wanted to make our designs and other information open source and available to the community but to do so properly would take a lot of time making sure that models and drawings were complete, accurate, or properly described. To go through everything and make sure it was something that I felt comfortable releasing to the community. I would love to find someone who was willing to help me do this. Someone in engineering school or passionate about this to help go through 3D scans, CAD designs, and information to prepare it. If you are interested feel free to email me. 


 

 


 

Matrix Garage cams

Image: 

MG-116A 288

$710.00

 
Lift 10.4mm
Advertised duration 288º
Duration at .050" 248º
 
Big numbers 3000 RPM to 8000 RPM.

A great cam for agressive street builds and moderate race builds.
Not recommended for stock ECUs.
Can be run on stock 16v buckets but extra care must be taken to make sure that the lifter, lifter bores and the rest of the head is tight and healthy.
It is highly recommended that TED componets build the head for these cams especially if the stock buckets will be used.
 
 

Price: $710.00

MG-102 272 performance cam

$710.00

272 duration
232 duration @ .050"
9.7mm lift
 
This cam was has a little more lift and duration @ .050" than our 617 cam. This was developed as an NA cam but can be used successfully with a properly sized turbo. Cam gears will help realize full power potential and may be more necessary with a turbo especially if the turbine side is too small and the overlap too big. .

Price: $710.00

Matrix Garage 820 cam 262 x 8.2

$710.00

Advertised duration 262

Duration @.050" 232

Lift 8.2mm

 

 

Due to Tomei's inability to keep cams in stock and always running out when we needed them we decided to look for alternatives and were lucky enough to connect with and work out a great deal with TED components.
Since tomei gets their cams made overseas in high volume I am not quite able to match their price but I have come as close as I can. With that said our cams were developed by a company that specilizes in getting performance out of the 4AGE and they are well worth the little extra.

Price: $710.00

Matrix Garage 265

$710.00

Duration 265
Duration at .050" 234
Lift 8.7mm
Due to Tomei's inability to keep cams in stock and always running out when we needed them we decided to look for alternatives and were lucky enough to connect with and work out a great deal with TED components.
Since tomei gets their cams made overseas in high volume I am not quite able to match their price but I have come as close as I can. With that said our cams were developed by a company that specilizes in getting performance out of the 4AGE and they are well worth the little extra.

Price: $710.00

MG-617 272 street, SC and turbo cam

$710.00

272 duration
230 duration @ .050"
9.2mm lift
 
street NA and turbo/SC cam
A very mild 272 making this a great cam for driveability and streetaibility. The profile is great for minimizing valvetrain stress making this a good cam for motors that will be driven a lot.
This cam was designed for boosted builds but has been proven in both boosted and NA applications.
This cam does need uprated valve springs on the 16 valve. It will work with stock 20 valve springs. 
 

Price: $710.00

courtesy of webmatter.de